BGS 10 Multiple

Halifaxman

Verified Trader
Joined
Sep 27, 2007
Messages
77
Reaction score
0
Location
Halifax, NS
Just wonder about the pricing multiple for a BGS 10. I see in Becketts that have a 9.5 priced at a multiple of 125%. Any ideas of what the multiple should be for a 10. The card is a low number high end RC card with only 3 or 4graded a 10. I know what some will say” whatever they re willing to pay”, I’m looking for some thoughts or experiences.

Thanks
 
depends on who it is. i've done a very wide range on my 5 BGS10 Lundqvist RCs. i think best bet would be to start at a 9.5 of the same card and go up from there.
 
I taught you were talking about the Sid BD rookie but i see low numbered so that must not be it.

There`s no fixed pricing multiple on a BGS 10, depending on the set condition and player demand, but i think its safe to say between 4-7 times what a BGS 9.5 would sell for on a modern card.
 
It should all depend on the set. A 10 Ice rookie is a lot easier to find than, say, a 10 Black Diamond or The Cup rc.
 
BGS 10 Pristine condition? If there the number of that specific card is BGS 10 is in double-digits, I estimate possibly up to triple (possibly more pending on the player and number in existence) of a BGS 9.5.

I find acetate cards (ie: UD Ice RCs, Trilogy Ice Scripts, etc.) would be easier to find in such a condition since the corners are usually a non-issue (of corner flaws would be extremely noticeable), you mainly would have to check for any scratches on the card surface. Of course, certain runs like 2005-06 UD Ice are centering-sensitive.

Sometimes, non-chipped Black Diamond cards can produce a BGS 10, given if the corners and edges are fine to close inspection.

Also, it can depend on the overall quality of print runs for that set. For instance, a run for a specific year's set could either have: roller marks, chipping on specific edges, crimping, etc. Of course it will also depend on how many people have sent in copies of that specific card
(and who the player is) for grading (check Beckett's grading population report).

If you want to examine your cards more closely, you will need a loupe (15x or better magnification) to find any flaws. Corner flaws are identifable to the naked eye upon close examination. This is more sure way to lower your chances of wasting money on grading a card that doesn't make the cut.
 
BGS 10 Pristine condition? If there the number of that specific card is BGS 10 is in double-digits, I estimate possibly up to triple (possibly more pending on the player and number in existence) of a BGS 9.5.

I find acetate cards (ie: UD Ice RCs, Trilogy Ice Scripts, etc.) would be easier to find in such a condition since the corners are usually a non-issue (of corner flaws would be extremely noticeable), you mainly would have to check for any scratches on the card surface. Of course, certain runs like 2005-06 UD Ice are centering-sensitive.

Sometimes, non-chipped Black Diamond cards can produce a BGS 10, given if the corners and edges are fine to close inspection.

Also, it can depend on the overall quality of print runs for that set. For instance, a run for a specific year's set could either have: roller marks, chipping on specific edges, crimping, etc. Of course it will also depend on how many people have sent in copies of that specific card
(and who the player is) for grading (check Beckett's grading population report).

If you want to examine your cards more closely, you will need a loupe (15x or better magnification) to find any flaws. Corner flaws are identifable to the naked eye upon close examination. This is more sure way to lower your chances of wasting money on grading a card that doesn't make the cut.

right on. I have a 10 power loupe that works great. anythig higher than that the card looks fuzy and at beckett they use a 10 power to do there grading
 

Latest posts

Forum statistics

Threads
389,542
Messages
2,233,474
Members
4,151
Latest member
barchamb13
Back
Top