How to Remove Scuffs and Scratches From Your Graded Card Slab

I searched on canadiantire.ca website, and there are 15 different Meguiar - liquid, spray, compound, etc.

Is there a specific one to buy?
 
Thank You all for sharing that technique, never heard of that before. Good too see it works well
 
How to polish up your scratched slabs.

I know Jeremy has mentioned this a few times on SCL and I've posted it on my ig a couple times but seems like some people are still not familiar with this super easy fix for your scratched slabs.

Most of the slabs I buy online show up somewhere between sorta scratched and nearly destroyed but there is a dead simple fix.

Run to your local Canadian Tire (or Amazon) and buy Meguiar's Scratch X 2.0.

ACjC6dE.jpg


Its made for polishing your cars plastic headlights but it works AMAZING on card slabs.

1- Put a loonie sized dab on the slab and work it in a circular motion with a clean microfiber cloth for 20-30 seconds.
2- Once its worked in (will look kinda hazzy) simply buff it off with a new clean microfiber.
3- Repeat steps 1 and 2 if the slab is still scratched up. Doesn't need super hard pressure, I'd say start light and slowly work up the pressure for deeper scratches.

Note: this stuff is a polishing compound so it is 'sanding off' a very thin layer of material to buff the surface clean. So don't concentrate too much on one spot, do the whole slab and always work in a circular motion.

Anyways onto the before and afters....

Joe Sakic before/after. Couple fairly deep scratches.
bo1R9om.jpg


Jagr before/after. Tons of light scratches as the slab was nearly 20 years old.
MLdebDp.jpg


And this extremely well used Gretzky. The slab looking like it was been sanded with sandpaper and was trashed. Thought it might need a reslab it was so foggy.
zop5C7U.jpg


wzP71Xp.jpg


Happy polishing!
 
I've tried this stuff as well - works great! Did not know the technical part of how it worked - thanks for the explanation.
 
Being a “car guy” as well, I first tried this out years ago with great results on one touches. As you’ve illustrated it also works for slabs. In fact, it also works on top loaders, but to a lesser extent. Relatively speaking Meguiars product is low to mid tier stuff when it comes to detailing products so I’m sure a higher end scratch remover may work even better but in terms of cost effectiveness it gets the job done.
 
sharkaholic707 said:
Being a “car guy” as well, I first tried this out years ago with great results on one touches. As you’ve illustrated it also works for slabs. In fact, it also works on top loaders, but to a lesser extent. Relatively speaking Meguiars product is low to mid tier stuff when it comes to detailing products so I’m sure a higher end scratch remover may work even better but in terms of cost effectiveness it gets the job done.
Click to expand...

I’m a car guy too (damn expensive hobbies haha) but in this case I wouldn’t bother with any more expensive compounds or polishes. The case just needs a quick scrub, and it doesn’t need any wax or protection.

I mean you can work multiple more expensive compounds with a random orbital machine but this Scratch X stuff works so good i can’t find any visible scratches on my slabs anymore. Save the more expensive stuff for a black car (which is impossible to get micro scratches out haha).
 
rohara99 said:
I’m a car guy too (damn expensive hobbies haha) but in this case I wouldn’t bother with any more expensive compounds or polishes. The case just needs a quick scrub, and it doesn’t need any wax or protection.

I mean you can work multiple more expensive compounds with a random orbital machine but this Scratch X stuff works so good i can’t find any visible scratches on my slabs anymore. Save the more expensive stuff for a black car (which is impossible to get micro scratches out haha).
Click to expand...

Agreed on all counts! Ceramic coat all day for black cars by the way :thumbsup:

Maybe another project for slabs? :crazy:
 
OilersRule said:
This looks like a great idea. Does it leave any lingering odour on the slab?
Click to expand...

Not really. Its doesn't smell great but as soon as its buffed off its good to go. I usually put it into a sleeve right away so no smell issue then.

capsfan30 said:
Until the sleeve gets a little scuffed up, and you decide to change it out for a fresh one, at which point, that scent which has been fermenting for how ever many years, is going to smell like hell on earth :laugh:
Click to expand...

haha

Since you're buffing the compound off there shouldn't be any residual product (or smell).

And if there is stop sniffing your slabs!
 
Last edited by a moderator:
rohara99 said:
Not really. Its doesn't smell great but as soon as its buffed off its good to go. I usually put it into a sleeve right away so no smell issue then.
Click to expand...

Until the sleeve gets a little scuffed up, and you decide to change it out for a fresh one, at which point, that scent which has been fermenting for how ever many years, is going to smell like hell on earth :laugh:
 
Last edited by a moderator:

Latest posts

Forum statistics

Threads
389,461
Messages
2,232,779
Members
4,146
Latest member
E_Thom_Tech
Back
Top